| View previous topic :: View next topic |
| Author |
Message |
Cheatham Joined: 13 Jul 2007 Total posts: 2 Location: FL Gender: Male |
Posted: Fri Jul 13, 2007 9:35 pm Post subject: I bought N8 truck with 7mgt3 in. |
|
|
| I'm new to the supra swaps. I've read about it and wanted to do it. I'm going to be putting the motor out N8's truck in to a 95 4runner. So I got the truck running. I put new plug in it and clean oil from around them. Drain the old gas and put fresh gas in it. The truck is bad ass!! But at high rpm's it break's up. What would be causeing it to do this? N8 if happen to read this can you let me know what mods you have done to the motor. Thanks for any help. |
|
| Back to top |
|
 |
SuperRunner Site Admin Joined: 21 May 2004 Total posts: 942 Location: Orem, Utah Age: 33 Gender: Male |
Posted: Wed Jul 25, 2007 12:20 pm Post subject: |
|
|
you bought N8's truck? Sweet. How did that deal go down, he is out of the country right now.
The breaking up is usually cause by:
bad CPS
bad plug wires
water/oil in the plug galley
My guess it is is the CPS(known problems with this) _________________ Supra Swapper and Owner of this site |
|
| Back to top |
|
 |
Cheatham Joined: 13 Jul 2007 Total posts: 2 Location: FL Gender: Male |
Posted: Thu Jul 26, 2007 5:48 am Post subject: |
|
|
| It was listed on ebay. Here's the listing # to it 140131165442. Thanks for the info. I going put the motor in a 95 4-runner. What do I need to use the v6 3.0 5 speed transmission? |
|
| Back to top |
|
 |
SuperRunner Site Admin Joined: 21 May 2004 Total posts: 942 Location: Orem, Utah Age: 33 Gender: Male |
Posted: Thu Jul 26, 2007 9:25 am Post subject: |
|
|
Oh man, I feel bad for him. So much time and money put into that thing.
I hope you finish the body work and do it justice. _________________ Supra Swapper and Owner of this site |
|
| Back to top |
|
 |
|