Home Page www.supracharged.com
This forum is for information on Supra Swaps
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

7m-ge into 94 4runner

 
Post new topic   Reply to topic    www.supracharged.com Forum Index -> Mounting
View previous topic :: View next topic  
Author Message
toyopraOffline
Joined: 18 Jan 2009
Total posts: 6
Gender: Unknown
PostPosted: Sun Jan 18, 2009 2:24 pm    Post subject: 7m-ge into 94 4runner Reply with quote

hi everybody
I am new in this forum

my name is dominic and i'm from quebec canada
my english is not perfect but i'll try my best to be clearely understand
I am swaping a 7mge from a cressida 89 into a 94 4runner with the 5mge motor mount , belt housing and clutch cylinder .... I keep my stock transmission (w-56) and stock cross-member ....at this point everything look fine exept for one thing
the brake booster and the intake are way to close..... i just can not leave this so close
I want to know if anyone have see this problem

my solution was to rise the trany 2 or 3 degres just to have enough clearence for the booster .......but I'll have more angle on my rear drive shaft

my second solution was to change the booster for a smaller one and use a bigger master...???

I have a 3inch boby lift and the truck had a 22re

here's the photo

Back to top
View user's profile 
motörheadOffline
Joined: 28 Jun 2005
Total posts: 24
Location: Ottawa, Ontario
Gender: Unknown
PostPosted: Thu Feb 05, 2009 11:42 am    Post subject: fitment... Reply with quote

I believe that you could dent the booster to gain a bit of extra clearance...I am slowly working on a 7m into an 86 runner, and that's what I'll do if I have clearance problems with my 2" lift. If I remember correctly, 4rnrRick said that the crankshaft was 1 1/4" higher when using 5m mounts, so I am planning to raise my transmission mount that much to help with the shifter sinking down...hopefully with a crossmember like the ones Budbuilt makes...
_________________
86 4runner
86 pickup
90 caravan (turbocharged)
87 Daytona (turbocharged)

If they aren't broke, I probably am...
Back to top
View user's profile 
motörheadOffline
Joined: 28 Jun 2005
Total posts: 24
Location: Ottawa, Ontario
Gender: Unknown
PostPosted: Thu Feb 05, 2009 11:43 am    Post subject: fitment... Reply with quote

oops...double post...
_________________
86 4runner
86 pickup
90 caravan (turbocharged)
87 Daytona (turbocharged)

If they aren't broke, I probably am...
Back to top
View user's profile 
toyopraOffline
Joined: 18 Jan 2009
Total posts: 6
Gender: Unknown
PostPosted: Sun Feb 15, 2009 7:17 pm    Post subject: Reply with quote

I made a 1"1/8 braket to rise the trany
the booster is about 1/4" from the intake
it's still close but should be enough clearence
Back to top
View user's profile 
toyopraOffline
Joined: 18 Jan 2009
Total posts: 6
Gender: Unknown
PostPosted: Sun Feb 15, 2009 7:18 pm    Post subject: crossmember Reply with quote

I made a 1"1/8 braket to rise the trany
the booster is about 1/4" from the intake
it's still close but should be enough clearence
Back to top
View user's profile 
toyopraOffline
Joined: 18 Jan 2009
Total posts: 6
Gender: Unknown
PostPosted: Sun Feb 15, 2009 7:19 pm    Post subject: Reply with quote

I made a 1"1/8 braket to rise the trany
the booster is about 1/4" from the intake
it's still close but should be enough clearence
Back to top
View user's profile 
Display posts from previous:   
Post new topic   Reply to topic    www.supracharged.com Forum Index -> Mounting All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group